Public IP Address | The IP address of the WAN port or any other Public IP |
| addresses given to you by your ISP. The WAN port may use |
| dynamic IP or static IP given by your ISP. If your ISP give you |
| more than one dynamic IP addresses, you have to assign the |
| session number that you want to apply. |
Client PC IP Address | Input the IP address of a particular host in your LAN that will |
| receive all the packets originally going to the WAN port/Public IP |
| address above |
| Note: You need to give your LAN PC clients a fixed/static IP |
| address for DMZ to work properly. |
Add DMZ | Fill in the "WAN Port", "Public IP Address” and “Client IP |
| Address” of the DMZ to be added and then click "Add". Then this |
| DMZ entry will be added into the "DMZ Table" below. If you find |
| any typo before adding it and want to retype again, just click |
| "Clear" and the fields will be cleared. |
Remove DMZ | If you want to remove some DMZ from the "DMZ Table", select |
| the DMZ entries you want to remove in the table and then click |
| "Delete Selected". If you want remove all DMZ entries from the |
| table, just click "Delete All" button. Click "Reset" will clear your |
| current selections. |
You can now configure other advance sections or start using the router (with the advance settings in place)
51