| appropriate boxes. If you want to select only one user |
| then input the user’s IP address in both boxes. |
| Note: You need to give your LAN PC clients a |
| fixed/static IP address for the Access Control rule to |
| work properly. |
Client PC Service | You can block the clients from accessing some Internet |
| services by checking the services you want to block. |
Protocol | This allows you to select UDP, TCP or both protocol type |
| you want to block. |
Port Range | You can assign up to five port ranges. The router will |
| block clients from accessing Internet services that use |
| these ports. |
Apply Changes | Click “Apply Changes” to save the setting. |
Reset | Click “Reset” to clear all fields. |
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
3.5.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL address or just keyword of the Web site.
Parameters | Description |
Enable URL Blocking | Enable/disable URL Blocking |
48