Parameters | Description |
Enable Protocol & Port Binding | The “Protocol and Port Binding” function is default |
| disabled. You can select to enable the “Protocol and |
| Port Binding” function. |
Source IP Range | Only packets with this assigned source IP range will |
| statically bind to the assigned WAN port. If you assign |
| 192.168.0.3 – 192.168.0.5, it means 3 IP addresses: |
| 192.168.0.3, 192.168.0.4 and 192.168.0.5 |
Destination IP Range | Only packets with this assigned destination IP range will |
| statically bind to the assigned WAN port. If you assign |
| 192.168.02.3 – 192.168.0.5, it means 3 IP addresses: |
| 192.168.0.3, 192.168.0.4 and 192.168.0.5 |
Source Port Range | Only packets with this assigned destination IP range will |
| statically bind to the assigned WAN port. |
Destination Port Range | Only packets with this assigned destination port range |
| will statically bind to the assigned WAN port. |
Protocol | Only packets with this assigned protocol will statically |
| bind to the assigned WAN port. |
WAN Port | The WAN port that the packets matching this rule are |
| statically bound to. |
|
|
|
|
43