Plantronics WO300, WO350 manual Configuration and test call, Checking configuration

Models: WO300 WO350

1 25
Download 25 pages 57.74 Kb
Page 9
Image 9
4 Configuration and test call

4 Configuration and test call

4.1 Checking configuration

1If your desk phone has a volume control set it to mid- range.

2On the base, ensure the Configuration switch is set to “A” and the Desk phone speaking volume and Desk phone listening volume are both set to 3.

7If the dial tone still does not sound clear, adjust the Configuration Switch until the dial tone sounds the best.

Note Multiple settings might work with your phone; however, only one is the optimal position.

8Press the call control button on the headset to complete configuration.

9Replace the handset into the desk phone cradle.

Desk phone

Desk phone

speaking volume

listening volume

 

Configuration

 

switch

NOTE For most phones, these factory default settings will sound the best.

3While wearing your headset, press the call control button on the headset.

4Remove the handset from desk phone cradle.

5Listen for a dial tone. If the dial tone sounds clear, press the call control button on headset and continue with Step 6. Making a test call with desk phone.

6You can fine-tune the listening volume on the headset by pressing the volume up button [+] to increase the volume and the volume down button [-] to decrease the volume.

4.2 Making a test call with desk phone

1If your desk phone has a volume control, ensure it is set it to mid-range.

2With your headset on, press the call control button on the headset.

3Remove the handset from desk phone cradle.

4Dial the number using your desk phone.

5If the listening volume is too loud or too soft, adjust the listening volume on the headset by pressing the call control button up to increase the volume and pushing down to decrease the volume.

6If the listening volume is still too loud or too soft adjust the Desk Phone listening volume on the base. A setting that is too high can produce an uncomfortable echo for you.

7If the speaking volume is too loud or too soft for your listener, adjust the Desk phone speaking volume on the base to the best setting for your listener. A setting that is too high can produce an uncomfortable echo for you and a distorted sound for you listener.

8Press the call control button on the headset to end the test call.

9Replace the handset into the desk phone cradle.

For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: plantronics.com/healthandsafety.

Plantronics Savi User Guide

9

Page 9
Image 9
Plantronics WO300, WO350 manual Configuration and test call, Checking configuration, Making a test call with desk phone