Names of the Remote Control Parts/Preparing the Remote Control
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Applicable Projector:
Side View | Top View |
20°
20°
6 m/19.7 feet
5°
Remote control in- frared transmitter
5°
8feet . 3m/9
30°
30°
Remote control in-
Remote con- frared transmitter trol sensor
5m/16.4feet
Remote con- trol sensor
5m/16.4feet
Applicable Projector:
Side View
Top View
6 m/19.7 feet
5°
Remote control in- frared transmitter
5°
8feet . 3m/9
Remote control in-
Remote con- frared transmitter trol sensor
Remote con- trol sensor
Note
*Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation.
*The remote control will not function when the battery is exhausted.
PrecautionsHandling of the Remote Control
*Do not drop the remote control or handle it inappropriately.
*Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry immediately.
*Try to avoid use in hot and/or humid locations.
*Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care of a doctor.
*Remove the batteries from the remote control when it is not going to be used for a long period.
*Some operations (such as menu operations) are available only through the use of the remote control and attention should be given to its careful handling.
