Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
STATUS
STANDBY
Lit amber
STATUS
STANDBY
STANDBY
AUTO
SOURCE
PCCONTROL
MOUSE
AUDIO
VIDEO
SVIDEO Firmly plug in all the way.
RGB
To wall outlet
2 Switch on the projector power
Press the STANDBY button.
STANDBY (button on main unit)
The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page
• When the power is turned on, the STANDBY indicator starts |
This indicator is also lit green in
STATUS | STATUS | STATUS |
STANDBY 
STANDBY 
STANDBY
Flashing green Lit green
Lit amber (Approximately 60
flashing green, then stops flashing after about 60 seconds. If |
the STATUS indicator lights green at this time, the lamp mode |
is set to “Eco”. See |
• If the power does not come on, see “When the STATUS Indica- |
tor is Lit or Flashing” on Page |
seconds)
Power is on
If the “Password” input window is displayed: See
The projector cannot be used unless the correct password is in- put.
To turn off the power: See
The projector is now capable of regular projection.
3 Switch on the power of the connected equipment
STANDBY | STANDBY |
|
| MENU |
LASER |
|
|
| |
| RGB |
| ENTER |
|
RGB VIDEO | AUTO |
|
|
|
| VIDEO | CANCEL |
| QUICK |
MENU | QUICK |
|
| Q |
| Q |
|
|
|
| FREEZE | MUTE | ECO | AUTO |
| 1 | 2 | 3 | 4 |
|
|
|
| ASPECT |
Note:
•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.
•Press the STANDBY button after the STANDBY indicator is lit in amber.•The included power cable is exclusively for use with the
