PLUS Vision U5-512 Protecting the Projector with the Security Lock, E-37, General Operation

General Operation

Protecting the Projector with the Security Lock

A password can be registered and the security lock set in order to protect the projector from unauthorized use.

Registering the password

The password is registered using the menus. For instructions on operating the menus, see “Menu Operations” on E-40.

(1)Select “Security Lock” in the “Option” menu and set it to “Enable”. The menu closes and the password registration display appears.

(2)Use the number buttons (1 to 4) to register the password.

Be sure to input a 4-digit number.		STANDBY		STANDBY			MENU
Example: Registering the password “2441”				LASER
				RGB		ENTER
(1) Press number button “2”. An “ ” (asterisk) appears at the first place.		RGB	VIDEO	AUTO
	*
				VIDEO	CANCEL		Q
Next press number buttons “4”, “4” and “1” in that order. Asterisks appear							QUICK
		MENU		QUICK
in all four places.				Q
				FREEZE	MUTE	ECO	AUTO
				1	2	3	4
							ASPECT
		ENTER		R-CLICK/
				CANCEL
				VOL	KSTN	ZOOM	TIMER
		FREEZE	MUTE	TIMER

(2)Input the password again. An “*” appears when the input number matches. If there is a mistake, the asterisks turn off. Start over from step

(1) above.

If the password matches, the password registration display closes.

Note:

To cancel the number you have input, press the CANCEL button.

The asterisks disappear and the display returns to the input standby mode at the first place.

To cancel the password registration mode, press the CANCEL button again. The “Pass- word” display turns off.

This completes password registration.

The “Password” input display appears the next time the power is turned on.

Note:

The numbers you have input are not displayed. Be sure to write down the password and store it in a safe place.

1 2

VOL ZOOM

3 4

E-37