Running setup
These steps perform the initial installation of the Windows BLL Generator package.
∙Close all programs currently running.
∙Insert disk 1 of the Windows BLL Generator installation disk set, skip this step if you’ve downloaded the Windows BLL Generator from the web site.
∙Press Start on the Windows tool bar, then select Run.
∙If you are using installation disks enter “a:setup“ in the “run“ dialog box as follows:
∙If you’ve downloaded the Windows BLL Generator or have received it from another source, use the Browse button to point to it.
∙Press OK. Setup now prepares the installation.
∙Press Next after reading the introductory screen.
∙Press Next after reading the readme file.
∙You will be asked to select a destination directory at this time. It is strongly suggested that you use the default directory offered by the installation program. Press Next.
∙Setup is now ready to install Windows BLL Generator. Press Next to install now.
∙Setup will install all program files at this time. Follow setup’s instructions to insert additional disks if needed.
∙Press Finish to exit setup.
∙Setup may ask you to reboot your computer in rare cases.
The Windows BLL Generator program files are now installed.
