When powering the camera ON for the first time the camera will take you through the initial
camera setup.
1)Charging the Battery
To charge your battery, first connect the USB Cable to your camera.
Then follow one of the steps below:
A)Charge the battery using the USB connection cable (included) and your computer:
-Connect one end of the USB cable into the USB port on your camera.
-Connect the other end of the USB cable to the USB port on your computer.
B) Charge the battery using the USB connection cable (included) and the AC Adapter
(included).
-Connect one end of the USB cable into the USB port on your camera.
-Connect the other end to the AC Adapter and then plug the AC Adapter into a power socket.
NOTE: While charging the battery, the LED light turns on. The battery is fully charged
when the LED light turns off.
5
