The graphical user Your projector features a graphical user interface that makes
interface it easy to control all of the projector functions. You can
make menu selections with the control panel or the remote
c o n t r o l .
Note: Menu selections differ depending on the type of
video source you select.
Using the menus with the control panel
1Press any of the menu keys to display the on-screen menus.
2Press the ✣and ✶menu keys to select the desired menu.
The items highlighted in green can then be changed.
3Use the ▲and ▼menu keys to move up or down a menu
column or to change a menu value. For some items (e.g.
Video Source), you may also need to use the Cand Vk e y s
to gain access to an item.
4The menus automatically disappear after five seconds. Set-
tings are automatically saved when you exit the menus or
turn off the projector.
Using the menus with the remote control
1Press the MENU key to display the on-screen menus.
2Move the joystick to the left or the right to select the desired
menu. The highlighted menu items can be adjusted.
3Move the joystick up or down to select items in a menu col-
umn or to change a value. For some items (e.g. Video
Source), you may need to move the joystick left or right to
select an item.
4Press the center of the joystick to change a value or to select
a check box option.
5Move the joystick away from you to move up one level in
any menu.
6Press MENU again to close the menu, or wait five seconds
and the menu automatically disappears. Settings are auto-
matically saved when you exit the menus or turn off the
p r o j e c t o r .
Using the projector 35