Replacing the lamp
1Turn off the projector.
2Unplug the projector power cord from the wall socket and
from the projector power receptacle.
3Loosen and remove the screw located on the right side of
the rear panel and remove the service door.
Removing the
service door
4Loosen the 4 lamp-assembly screws (you cannot remove
them from the service door).
Loosening the
lamp-assembly
screws
Caution: The lamp assembly gets very hot during opera-
tion. Use appropriate care when changing lamps. Make sure
that the lamp assembly has cooled for at least 3 to 5 min-
utes before touching it.
46 Maintenance