Warning
■Handle the power cord with care.
•Do not damage, cut, process or strongly twist the power cord. Placing
heavy objects on the power cord, heating or strongly pulling the power cord can result in damage as well as fire or electrical shock.
•Pulling on the power cord
•Placing heavy objects on the power cord
•Damaging the cord
•Placing near heaters
•Do not position the power
cord under the projector. This can damage the power cord and cause fire or electrical shock. Also, do not place a spread, cover, etc., over the power cord because this could result in the inadvertent placing of heavy objects on the concealed power cord.
•If the power cord is damaged (exposed or broken core wires,
etc . ), contact your dealer for replacement; otherwise, fire or electrical shock could result.
•Make sure there is no dust, etc., on the power plug and insert a knife blade to make sure that
there is no looseness.
■Do not allow the laser beam to enter the eyes.
•This remote control is equipped with a laser pointer and a laser beam is emitted from the laser outlet. Do not look directly into the laser beam outlet or direct the laser beam at other people.
Vision can be impaired if the laser beam enters the eyes. Especially pay attention if children are present.
■High temperatures are generated when the lamp is lit, so do not place objects in front of the lens.
Laser beam outlet
