Polk Audio DSWPRO400, DSWPRO500 English, First Things First, Placing Your Subwoofer In A Cabinet

Models: DSWPRO600 DSWPRO400 DSWPRO500

1 52
Download 52 pages 616 b
Page 4
Image 4
ENGLISH

ENGLISH

FIRST THINGS FIRST

Caution: Subwoofers are heavy. Exercise caution when unpacking your subwoofer.

Take Inventory

1 Subwoofer

1 Remote Control

1 Owner’s Manual

1 Power Cord

1 Registration Card

4 Rubber Foot Inserts

Please inspect your subwoofer carefully. Notify your Polk Audio dealer if you notice any damage or missing items. Keep the carton and packing material. It will do the best job of protecting your subwoofer if it needs to be transported.

Your system includes a detachable power cord that’s packaged separately from the subwoofer. Insert the female end into the receptacle on the amplifier plate and insert the AC plug into a wall outlet (or power strip) as per the safety instructions found on the inside cover of this manual. We do not recommend connecting the subwoofer’s AC power cord to your receiver’s switched outlet.

Feet/Carpet Spikes

DSWPRO Series subwoofers have removable feet. Each foot’s shaft is also a carpet spike, which allows you to place your subwoofer on a carpeted floor.

To remove the conical feet from the carpet spike, grasp a foot firmly and turn the foot clockwise while pulling up. Three complete turns should raise the foot enough to allow you to place your fingertips under the foot and pull it off the spike.

PLACING YOUR SUBWOOFER IN A CABINET

DSWPRO Series subwoofers have removable feet, allowing you to place the subwoofer in a cabinet, thereby reorienting the subwoofer’s driver so that it faces into your listening room.

PLACING YOUR SUBWOOFER IN A ROOM

Your DSWPRO Series subwoofer is magnetically shielded for placement near video monitors. (LCD, DLP and Plasma televisions are not affected by magnetism.) Allow at least 18" (46cm) of space between your subwoofer and any tube television, but

Note: The remote control may not operate when the subwoofer is placed in a cabinet with the driver facing into the room. If this occurs, adding an IR repeater will enable the remote control to communicate with the subwoofer.

if you do notice video distortion or discoloration, immediately move the subwoofer away from the TV.

The Polk Room Optimizer (PRO) feature lets you place your subwoofer anywhere in the room without compromising performance. When placing your subwoofer in the room, always place your subwoofer on its base, feet side down. If you can avoid it, do not place your subwoofer next to an open door.

18" - 24" (46cm - 61cm)

OK

front

1.

 

 

amp

 

side

 

rubber

3.

inserts

2.

driver

slot port

4.

We do recommend placing your subwoofer in different locations within your room to learn what produces the best sound quality based upon your listening preferences.

The PRO feature will tailor your subwoofer’s performance to its location in your room. Select one of the four buttons on your subwoofer’s remote control that indicates where you’ve placed your subwoofer in the room. (For more on this feature, see “Polk Room Optimizer.“)

For more information on subwoofer placement, go to

www.polkaudio.com/education/article.php?id=20.

Instructions For Placing Subwoofer In Cabinet:

1.With the subwoofer’s logo facing you, turn the sub on its side.

2.Unscrew the feet from the bottom of the subwoofer.

3.Reattach the feet in the threaded inserts located

on the amplifier side. Press rubber inserts into bottom of feet.

4.Turn the subwoofer onto its feet. Place the subwoofer in the cabinet so that the driver faces into the room.

Note: Grilles are available for DSWPRO Series subwoofers at your authorized Polk Audio dealer or at www.polkaudio.com.

4Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

Page 4
Image 4
Polk Audio DSWPRO400 English, First Things First, Placing Your Subwoofer In A Cabinet, Placing Your Subwoofer In A Room