Polk Audio N1 manual 4Hold TV remote 6 - 1 from SurroundBar

How To Set Up A Remote Control For Your SurroundBar

SmartBar™ Programming Note:

For your SurroundBar to respond to your remote control, you MUST FIRST program the bar to respond to your television’s original IR (Infra-Red) remote. An RF (Radio Frequency) remote will not work. Other remotes (cable, satellite) will work only after you have programmed the bar to respond to the TV’s IR remote.

Programming Instructions:

Your SurroundBar is currently programmed to respond to the remote control that is included with the product. However, we strongly recommend programming the SurroundBar to also respond to your existing remote control using the steps illustrated below. This will enable you to oper- ate all of your components using a single remote control. While programming the SurroundBar, ignore anything that may be displayed on the TV screen.

Example: To teach your bar the “Volume Up” command of your remote control:

1The SurroundBar is turned on and the LED is solid green. And you have sound coming from the bar.

2Press and hold “LEARN” for 2 seconds, or until LED blinks blue, then release the “LEARN” button.

LED

Blinks blue

3Press and release Volume Up “ + ” LED turns solid blue.

LED

Solid blue

4Hold TV remote 6" - 1' from SurroundBar.

6" - 1'

Customer Service Hours of Operation: Monday-Friday, 9am-5:30pm est polkcs@polkaudio.com 11