Bluetooth® Wireless Technology
To use your Bluetooth wireless technology device with the SurroundBar, you must first pair your device with your SurroundBar. Pairing creates the ability of your Bluetooth device to connect with your SurroundBar wirelessly. Pairing is like a hand- shake between your Bluetooth device and your SurroundBar in which they meet and exchange information.
You only have to pair your SurroundBar with your Bluetooth device one time for this exchange of information to take place. After that you simply select the “polk n1” from your device list
to make the connection to your SurroundBar. The SurroundBar can hold 8 Bluetooth devices in its memory. If enough devices pair after yours, your device could be dropped from the memory list.
Pair and connect your Bluetooth device with the SurroundBar:
1.Make sure your Bluetooth device and SurroundBar are both powered on.
2.Activate the Bluetooth function on your Bluetooth source device. See your device’s manual for instructions.
3.Press the Bluetooth source button from the SurroundBar remote.
The Bluetooth LED will illuminate, then begin slowly pulsing as it looks for a device to pair with.
4.Your SurroundBar will now be displayed on your source device and available to pair and/ or connect. Select the “polk n1” on your device to initiate the connection process.
5.After a short delay (5 seconds), the two de- vices should now be connected. You should hear a short tone and the Bluetooth source LED will now be steady blue.
6.Play your music from your device!
Note: If your device asks for a passcode to pair to the SurroundBar, enter “0000.”
How to disconnect with a Bluetooth device:
1.Press and release the remote control Bluetooth button, or
2.Press and release the Bluetooth source button, or
3.Turn off or disconnect the Bluetooth feature on your Bluetooth device.
The SurroundBar will emit a short tone and the Bluetooth source symbol will begin slowly pulsing when disconnected.
Automatic connection:
Any time you want to connect the last connected device and play it through the SurroundBar,
do the following:
1.Turn your device’s Bluetooth function on.
2.Enter Bluetooth source by pressing the Blue- tooth source button from the remote or press the Bluetooth button on the SurroundBar.
3.After a short delay, the two devices will auto- matically connect, you will hear a short tone, and the Bluetooth source LED will now
be steady blue.
Note: By default, the last connected Bluetooth device will automatically connect if available.
Pair and/or connect to a device when in Bluetooth source, but disconnected:
1.Engage the Bluetooth function on your Bluetooth source device. See your device’s manual for instructions.
a.The SurroundBar will be displayed on your source device as available to pair and connect. Select the “polk n1”
on your device to initiate the pairing and connection process.
After a short delay, the two devices should now be paired and connected. You should hear a short tone and the Bluetooth source symbol will now be steady blue.
How to disconnect:
Note: Anytime The SurroundBar exits SLEEP mode and is in Bluetooth source, the SurroundBar will automatically connect to the last connected Bluetooth device if the paired device’s Bluetooth feature is on.
10Polk Customer Service
