Installing the SpectraLink 8000 SVP Server
PN: 1725-36032-001_F.doc 1
Connect SVP Server to LAN Using a Cat. 5 cable, connect the NETWORK port on the SVP Server to
the connecting port on the Ethernet switch.
Connect power 1. Connect the power plug from the AC adapter to the jack labeled
PWR on the SVP Server.
Use only the provided Class II AC Adapter with output 24VDC, 1A.
2. Plug the AC adapter into an 110VAC outlet to apply power to the
SVP Server.
3. The system will cycle through diagnostic testing and the LEDs
will blink for about one minute. When the system is ready for use:
— The ERROR LED should be off.
— Status 1 should be blinking.
7