SpectraLink 8000 SVP Server: Administration Guide for SRP
Connecting via telnet
Telnet can only be used after the SVP Server’s IP address is
configured.
The Telnet method of connection is used for routine maintenance of
the SpectraLink Server for both local and remote administration,
depending on your network.
To connect via Telnet, run a Telnet session to the IP address of the
SVP Server. Once you connect and log in, the NetLink SVP-II System
menu displays.
The NetLink SVP-II System Menu The main menu displays as shown here:
System Status —menu for viewing error messages, status of operation
and software code version.
SVP-II Configuration —allows you to set the mode and reset the system.
Network Configuration —allows you to set network configuration
options, including IP address and hostname.
Change Password —allows you to change the password for SVP Server
access.
PN: 1725-36032-001_F.doc
20