Polycom 1725-36032-001, 8000 SendAll

SpectraLink 8000 SVP Server: Administration Guide for SRP

SendAll

In a system with multiple SVP Servers, the SendAll option is provided

to speed configuration and to ensure identical settings. The S=SendAll

option allows you to send that configuration parameter to every SVP

Server on the LAN. SendAll can only be used after the IP address is

established on EACH SVP Server via the serial connection. If you

anticipate identical settings across the LAN, set just the IP address

and custom hostname (if desired) for each SVP Server using the initial

serial connection. Then connect via the LAN and use SendAll to set

identical configuration options for all SVP Servers.

If SendAll is to be utilized in your system, all passwords must be

identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL

CONFIGURATION IF THE SendAll OPTION IS DESIRED. Use the

default password and change it globally if desired after a LAN

connection is established for all SVP Servers.

If independent administration of each SVP Server is desired, the

passwords may be set at initial configuration.

The following options must be configured:

Enter the IP address of the SVP Server, defined by your network

administrator. Enter the complete address including digits and

periods. DHCP may be entered.

The SVP Server will automatically lock for maintenance if the IP

address is changed. When this Maintenance Lock occurs, the SVP Server

must be reset upon exit. All active calls are terminated during a reset.

(Optional) The name of the SVP Server to which you are connected,

for identification purposes only. You cannot enter spaces in this field.

Change the default host name, if desired.

The host names for each SVP Server and OAI Gateway on the

system must be unique.

PN: 1725-36032-001_F.doc