2

Installing the SpectraLink

Configuration Cradle

Set up the Configuration Cradle by first obtaining the appropriate SpectraLink power supply for your country or region. Place the Configuration Cradle on a flat, horizontal surface and plug the power supply into the Configuration Cradle and into an appropriate wall outlet. Plug a straight-through serial cable into the Configuration Cradle and into an available serial port on the PC.

Set up a folder for Wireless Telephone configuration on the PC and download the programming software from the Polycom website http://www.polycom.com/usa/en/support/voice/wi- fi/dual_charging_stand.html into this folder. Extract the individual files from the zip and run the PhoneConfig.exe file.

Note that there is no installer or uninstaller since the program does not modify your system or registry. It runs from its current location and stores its settings locally.

Serial port settings are handled automatically by the Configuration Cradle software. If necessary, the COM port the Cradle is using can be set in the Settings menu.

USB Serial Adapters: Some adapters are incompatible with the Configuration Cradle. Of the adapters tested by Polycom engineering, two have been found to work:

Sakar International IConcepts Item #60448

Keyspan USA-19HS

PN: 1725-36036-001_E.doc

9

Page 9
Image 9
Polycom 1725-36036-001_E manual Installing the SpectraLink Configuration Cradle