User Guide V2IU 4300T Converged Network Appliance
Install two screws 4 14/16” horizontally apart on a wall or other vertical surface. The screws should protrude from the wall so that you can fit the appliance between the head of the screw and the wall.
1.If you install the screws in drywall use hollow wall anchors to ensure that the unit does not pull from the wall due to prolonged strain from the cable and power connectors.
2.Remove the 4300T and accessories from the shipping container.
3.Hang the 4300T on the wall.
4.Connect the power and network cables to the appropriate ports on the back of the system.
Warning Secure the power supply using a fastener or nearby shelf so that it does not hang from the power connector.
Caution To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to connect the T1 port on your unit to an
Administration of the 4300T
The 4300T is configured using a web browser such as Internet Explorer or Netscape Navigator. The 4300T is shipped with a
1.Connect a PC using an IP address of 192.168.1.2 and subnet mask of 255.255.255.0 to LAN port 4 of the 4300T.
2.Launch a web browser on the PC and enter the URL string: 192.168.1.1. Press Return. The initial 4300T main configuration menu appears.
3.Select the Network link - enter the username root and the password default to log into the system.
2 - 2
