Configuring the 4300T
4.Select the Apply Route checkbox.
5.Enter the IP Network address. This address is the remote data network you would like the 4300T to forward to the gateway. The hosts portion of the IP address should be set to “0”. For example, 10.10.20.0
6.Enter the Netmask of the remote data network. For example, 255.255.255.0
7.Enter the Gateway IP address of the interface that will receive all packets destined for the remote data network.
8.Press Submit.
Delete the static route
1.Select System.
2.Select System Overview.
3.Select Route.
4.Remove the check in the Apply Route checkbox.
5.Press Submit.
Firewall Configuration
3 - 35
