User Guide V2IU 4300T Converged Network Appliance
• Traffic shaping and priority queuing to guarantee high quality voice traffic. These mechanisms protect voice and data traffic from contending for the same network resources to guarantee low latency and the highest call quality possible for VoIP traffic. At the same time they ensure the best utilization of WAN bandwidth by enabling data traffic to burst up to full line rate in the absence of voice calls. Precedence is automatically given to traffic coming from IP phones and other devices using the 4300T’s Application Layer Gateway function.
• NAT/PAT translation for IP phones and PC’s. This allows a single IP address to be used on the WAN link to represent all of the private IP addresses assigned to the LAN IP phones and PC’s.
• A “VoIP” aware firewall. A full layer 7 gateway for voice traffic and a stateful packet inspection firewall for data traffic.
• Call Admission Control (CAC). CAC uses a deterministic algorithm to decide when there are insufficient network resources available to adequately support new calls and then return the equivalent of a “fast busy” to new call requests.
• DHCP server and TFTP relay. These features are used to simplify and expedite the IP configuration of phones and PC’s. This also includes VoIP signaling gateway information (MGCP, SIP, H.323 and SCCP).
• Call quality monitoring and test tools.
• VoIP survivability. Provides call switching to an LAN based PSTN gateway during WAN outages.
Configuration Outline
|
| Configure For Station |
Task | Subtask | Side IP PBX |
Application? | ||
System Configuration | configure LAN/WAN interface | Yes |
|
|
|
| set ethernet link rate | Optional |
|
|
|
| enable the DHCP server | Optional but |
|
| recommended |
|
|
|
| configure SNMP | Optional |
|
|
|
VoIP Configuration | enable the VoIP ALG | Yes |
|
|
|
| configure a VoIP subnet route | Optional |
|
|
|
Data Networking Configuration | dynamic NAT | Optional but |
|
| recommended |
|
|
|
| static NAT | Optional |
|
|
|
3 - 6
