Summary of picture settings

The following picture settings can be configured. Depending on the format of the picture source, some picture settings might not be available.

Contrast - Sets the level of white in the picture.

Brightness - Sets the brightness of the picture.

Color - Sets the level of saturation.

Tint - Adjusts the color balance between red and green.

Sharpness - Sets the sharpness of fine details.

Color temperature - Sets the color temperature to normal, warm or cool.

Dynamic contrast - Enhances contrast in the darker and the brighter picture areas as the image on the screen changes.

HD Natural Motion (HDNM) - In selected TV models only. Reduces field and line flicker to display movement smoothly. You can switch HDNM on or off.

Digital Noise Reduction (DNR) - Automatically filters out and reduces image noise and improves picture quality when receiving weak video signals. You can switch DNR on or off.

MPEG artifact reduction - Smooths transitions on digital pictures. You can switch MPEG artefact reduction on of off.

Color enhancement - Makes colors more vivid and improves the resolution of details in bright colors. You can switch color enhancement on or off.

Active control - Corrects incoming signals to provide the best picture possible according to lighting conditions in the room. You can switch Active Control to one of these settings: Off, On with light sensor or On without light sensor.

Picture format - Changes the format of the picture.

Horizontal shift - Adjusts the horizontal position of the picture.

Vertical shift - Adjusts the vertical position of the picture.

Change picture format

1. Press FORMAT on the remote control.

2.Press Î or ï to select a picture format and press OK to confirm your choice.

Summary of picture formats

The following picture formats can be selected. Depending on the format of the picture source, some picture formats might not be available.

Automatic

(Not for PC mode.)

Enlarges the picture automatically to best fit the screen. The subtitles remain visible.

Super zoom

(Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion.

4:3

Shows the classic 4:3 format.

Movie expand 14:9

(Not for HD and PC mode.) Scales classic 4:3 format to 14:9.

Movie expand 16:9

(Not for HD and PC mode.)

Scales the classic 4:3 format to 16:9.

Wide screen

Stretches the classic 4:3 format to 16:9

Unscaled (In selected TV models only) (For HD and PC mode only)

Allows maximum sharpness. Some distortion may be present due to the broadcaster's systems. Set your PC resolution to widescreen mode for best results.

ESPAÑOL FRANÇAISE ENGLISH

EN-15

Page 17
Image 17
Polycom 52PFL7403D Summary of picture settings, Change picture format, Summary of picture formats, Automatic, Super zoom