Placing a Call
Note: If you are prompted to enter a number when
placing a call, click Controls, click Keypad, and enter the number.
Main Page and Toolbar
Entering a Name or Address
1.Enter the site name or address on the Main page.
2.Click Call.
Using the Directory
1.Click Directory.
2.Select an entry.
3.Click Call.
Using the Speed Dial List
1.Click Speed Dial.
2.Select an entry.
Placing a Multipoint Call
To place a multipoint call, you must be using Polycom® PathNavigator™ with multipoint support.
1.Click Directory.
2.Click Multipoint.
3.Select the sites and click +.
4.Click Call.
Answering a Call
¾Click Yes when the system rings and the call notification dialog box appears.
Ending a Call
Access the online help
Access system information
Access the Setup pages
View call status, such as missed calls, alerts, encryption, and call forwarding status
Decrease or increase the volume
Create and send
VideoMail
Mute the microphone
Turn the PIP on or off
Change the display (switch between Main Window View and Toolbar View)
Select the call rate and call quality
Place calls
End calls
• Add directory entries
• Add speed dial entries
• Drag directory entries onto the desktop
Place calls
Show the Microsoft®
Windows® desktop
•Access camera controls
•Share and collaborate on content
•Use the whiteboard
•Transfer and receive files
•Use
•Access the keypad
¾Click Hang Up.
Viewing Missed Calls
If you receive an incoming call, but do not answer it, appears on the Call Status bar on the Main page.
Always show the Toolbar, or hide it when you move the cursor away
End calls
Place calls
Select the call rate and call quality
Place calls
•Decrease or increase the volume
•Mute the microphone
•Turn the PIP on or off
View call status, such as missed calls, alerts, encryption, and call forwarding status
•Access the online help
•Access system information
•Access the Setup pages
¾
Missed calls appear in the Recent Calls list with a red arrow and an exclamation point.
Change the display (switch between Main Window View and Toolbar View)