Polycom DOC2558B manual RMX 2000 Rear Panel, Rtm Ip, 1-11

Polycom RMX 2000 Hardware Guide

RMX 2000 Rear Panel

The RMX 2000 rear panel contains the RTM IP card and optionally, the RTM ISDN card. The RTM IP card must be located on the bottom slot in the rear of the RMX 2000. In addition, the rear panel houses the main power switch, AC inlet, a circuit breaker, and additional communications ports.

RTM IP

The RTM IP card provides system management based on the ATCA standard and connects to the backplane. It controls and monitors the system fans and regulates power supply. This card contains an Ethernet Switch that manages the network of the system, routes data between the cards and components of the system and provides connectivity to external IP networks.

The RTM IP card connections include:

•3 LAN ports

•10/100Mb ShMG port (Future Use)

•1 Serial port (Future Use)

•1 USB port

LAN1, LAN3 and the 10/100Mb ShMG ports shall not be used and the plastic caps covering those ports should not be removed.

LAN 1-3 Ports		10/100Mb ShMG	Internal LAN	Serial	USB	Standby button &
	& LEDs	LAN & LEDs	connections	Port	Port		LED

LAN1, LAN 3, ShMG and the Serial ports are only for debugging and not for customer use

Figure 1-2RMX 2000 RTM IP Rear Panel Layout

1-11