Chapter 1- Hardware Description
The following items appear on the RMX 2000 rear panel:
Table 1-5 RMX 2000 Rear Panel - RTM IP Component Description
Item | Description |
|
|
LAN 1 | NA - Disconnected. |
| Note: LAN 1 is covered with a plastic cap that should not |
| be removed. |
|
|
LAN 2 | Used for the Network connection. |
|
|
LAN 3 | For Remote Access only using the Alternate Management |
| Network. For more information, see the RMX 2000 |
| Administrator’s Guide, Appendix F: "Alternate |
| Management Network” on page |
| Note: When not in use, LAN 3 is covered with a plastic |
| cap that should not be removed. |
|
|
10/100 ShMG | NA - For debugging purposes only. |
| Note: 10/100 ShMG is covered with a plastic cap that |
| should not be removed. |
|
|
Serial | NA - For debugging purposes only. |
|
|
USB | USB key connection. For more information, see the RMX |
| 2000 Getting Started Guide, "First Time Installation and |
| Configuration” on page |
|
|
Standby button | Toggle between CPU activation and standby. |
|
|
