Camera Presets - Storing
It is suggested that all camera presets be done before starting a videoconference. A total of 10 presets are available.
YOUR CAMERA:
The camera icon in the top right corner should be pointing towards you. If not, press the NEAR button.
Frame the individual(s) or objects using the ZOOM button and
DIRECTIONAL buttons.
FAR END CAMERA:
The camera icon in the top right corner should be pointing away from you. If not, press the FAR button.
Frame the individual(s) or objects using the ZOOM button and
DIRECTIONAL buttons.
To set your camera presets:
1. Press the PRESET button on the remote.
2.Press the number that you want to assign the preset set to.
3.The screen will display a message saying, “Preset X stored” (where X is the number you assigned).
4.Test your preset by moving your camera to a different view, then press the number you assigned to the preset. The camera should move to the
Note: If you physically move the PolyCom EX system, the presets may need to be reset.
Camera Presets – Accessing
YOUR CAMERA:
The camera icon must be facing you. Select numbers
FAR END CAMERA:
The camera icon must be pointing away from you. The camera will automatically move to the
PolyCom EX User Manual | Aug. 18, 2004 v 1.1 | Page 10 of 13 |
Copyright © NORTH Network 1998.
The information herein may be reproduced provided that it is accurate and NORTH Network is credited as the source.
