CAMERA CONTROLS

CAMERA CONTROLS

You can control both your camera (Near End) and the camera at the other location (Far End).

Near End Camera

To adjust your camera, press the NEAR button on the remote control once.

The camera icon found in the top right hand corner of the television monitor will point towards you.

If the camera is already facing you, pressing the NEAR button temporarily displays other icons.

Far End Camera

To control the far end camera during a call, press the FAR button on the remote control once.

The camera icon in the top right hand corner of the monitor will point away from you.

If the camera icon is already pointing away from you, pressing the FAR button temporarily displays other icons.

Note: You can only have Far End Camera control if the Far End site allows you to.

Pan and Tilt

To move the camera to the left, right, up and down, use the red

DIRECTIONAL buttons on the remote control.

Zoom

To zoom in or out, press the ZOOM buttons found below the red DIRECTIONAL buttons.

Press the Near End Camera button to get a close up of an image.

Press the Far End Camera button to get a far away view of an image.

PolyCom EX User Manual

Aug. 18, 2004 v 1.1

Page 9 of 13

Copyright © NORTH Network 1998.

The information herein may be reproduced provided that it is accurate and NORTH Network is credited as the source.

Page 9
Image 9
Polycom The Remote Control user manual Camera Controls, Near End Camera, Far End Camera, Pan and Tilt, Zoom