Camera Presets - Deleting
Camera presets will remain until they are either changed or deleted.
To delete all your presets:
1. Press the PRESET button on your remote.
2. Press the # (number sign) on your remote.
The camera presets are now deleted. You cannot delete presets one at a time; you can only delete them all at once.
Snapshots
TAKING/SENDING A SNAPSHOT IMAGE
During a call you can obtain and send a snapshot image of what is on the screen. This image can be captured from the main camera or from a peripheral hand held camera.
To take and send a snapshot image:
1)Press the SNAP button once on the remote control. The Near End image will fill the monitor screen.
2)Adjust the camera’s position by using the DIRECTIONAL buttons and the ZOOM button.
3)Once you are ready to take and send the snapshot, press the SNAP button again. A message will appear on screen confirming that the image was sent.
4)To go back to the live video, press the NEAR button on the remote control.
RECEIVING SNAPSHOTS
When you receive a snapshot, it will appear in the main window.
To go back to live video, press the NEAR button on the remote control.
What You Will See If You Have:
1 MONITOR - The snapshot image appears in the main window.
2 MONITORS - The snapshot image appears in the preview monitor.
PolyCom EX User Manual | Aug. 18, 2004 v 1.1 | Page 11 of 13 |
Copyright © NORTH Network 1998.
The information herein may be reproduced provided that it is accurate and NORTH Network is credited as the source.
