Chapter 3-Additional Conferencing Information
Polycom, Inc. 3-43
To select the lecturer and enable the Lecture Mode while starting the conference:
>> In the Conference Properties - Participant dialog box, enable the Lecture Mode in one of
the following methods:
Selecting a defined participant:
aAdd participants to the conference either from the Address book or by defining
new participants.
bIn the Lecturer field, select the lecturer from the list of the defined participants.
Automatic selection of the lecturer:
—In the Lecturer field, select [Auto].
In this mode, the conference speaker becomes the lecturer.
To select the lecturer and enable the Lecture Mode during the ongoing conference:
1Make sure that the participant you want to designate as the lecturer has connected to
the conference.