ROUTER PEDESTAL
You can attach the inverted back half of the case to a workbench with screws through the holes (H) Fig. 30 In this configuration, storage for a wrench (A) Fig. 31, spare collet (B), and 1/4" and1/2" router bits (C) is available. You can cut out the center of the router parking pad (D) with a sharp utility knife to allow for storage of the router with a bit installed. To store the height adjustment handle, drill a 13/32" diameter hole at (E) Fig. 31.
Both halves can be joined together as shown in Fig. 32 to provide storage for the router and other parts on the work- bench.
Fig. 32
To avoid injury and/or damage to finished work, always allow the motor to come to a COMPLETE STOP before putting the tool down.
USING A ROUTER ACCESSORY TABLE
The router can be mounted to a router accessory table (not included). For instructions on how to mount the router to the router accessory table, refer to the accessory table instruction manual.
20
