ACCESSORIES
Accessories for this unit are available at the store the unit was purchased.
ASSEMBLY
HANDLE ASSEMBLY
1.To make installation easier, submerge handle grip (C) into warm soapy water. Remove handle grip (C) from soapy water and slide onto handle (D).
2.Press tube plugs (E) into frame assembly as shown.
3.Attach handles (D) to frame using knobs (F) and saddle bolts (G) supplied. Choose the recommended or alternative position for the handles as shown below.
C |
D |
E |
G |
F |
RECOMMENDED HANDLE ASSEMBLY
NOTE: This position of the handle provides maximum protection to the air compressor components.
ALTERNATE HANDLE
ASSEMBLY
NOTE: This position of the handle allows easier mobility but does not provide maximum protection to the air compressor components.
9- ENG | D29795 |
