Table Saw | Porter-Cable (Model TS220LS) instruction

10" Table Saw

(Model TS220LS)

INSTRUCTION MANUAL

PART NO. 905579 - 03-24-04

Copyright © 2004 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 29
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Porter-Cable (Model TS220LS) instruction manual Table Saw

Contents

Table Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Failure to Follow These Rules MAY Result in Serious Injury Failure to Follow These Rules MAY Result in Serious Injury Additional Safety Rules for Table Saws Motor Specifications Power ConnectionsVolt Single Phase Operation Grounding Instructions Minimum Gauge Extension Cord Extension Cords Assembly Unpacking and CleaningFunctional Description ForewordPage Stand Parts SAW to Stand Stand Assembly Assembling Blade Raising and Lowering Handwheel Blade Guard Splitter Assembly Page Guide Rail to SAW Extension Wing Miter Gage RIP Fence Miter Gage Holder Disconnect Machine from Power Source Outfeed Support Locking Switch OFF Position Operating Controls and AdjustmentsStarting and Stopping SAW Overload Protection To Adjust Positive Stop AT 90 Degrees Adjusting 90 and 45 Degree Positive StopsTo Adjust Positive Stop AT 45 Degrees Blade Tilting Control Miter Gage Operation and Adjustments RIP Fence Operation AdjustmentsC B Changing the Blade Adjusting Blade Parallel to Miter Gage SlotsACB Common Sawing Operations Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTINGCROSS-CUTTING Constructing a Push Stick Ripping Accessory Dado Cutterhead Using Auxiliary Woodfacing on RIP Fence Attach the dado head set D , to the saw arbor Constructing a Featherboard Constructing a Push Stick Pushstick Accessories Canadian PORTER-CABLE Delta Service Centers