QUICK FACTS

CALL 1-888-559-8550 TO FIND A LOCAL AUTHORIZED SERVICE CENTER NEAR YOU FOR REPAIRS AND SERVICE PART PURCHASES

ENGINE

GAS

ENGINE OIL

WATTAGE

WIRING

BATTERY

VOLT REG.

ENGINE

STORAGE

OPERATION

Use clean, fresh gasoline with a minimum 87 octane rating. Do not add gasoline during or immediately after use.

Refer to engine owner's manual for oil recommendations. Most generators are equipped with a low-oil shutdown. If the oil is low or if the Generator is not level, the engine will not start.

Make wattage calculations before use. Refer to general operator's manual for further instructions.

Contact an electrician for any wiring instructions. If wiring into a house, a double-throw transfer switch and a heavy duty cord set must be used.

Use a standard (12V) lawn and garden battery with a minimum of 45 A.H. or 210 CCA.

The voltage and frequency are regulated by the rpm's of the engine. Do not adjust the throttle or governor to achieve higher performance. This will only alter the factory Pre-set settings and damage anything connected to the generator.

Be sure a volt/amp surge protector is used when sensitive electronic equipment is used, such as: televisions, computers, stereos, and etc… The damage of such equipment without the use of a protector WILL NOT be covered under warranty.

Do not adjust or attempt maintenance without consulting engine manual or an authorized engine service center.

Add stabilizer to fuel tank and run engine for 5 minutes before storage.

When in long term storage, operate the generator every 60 days for at least 10 minutes with a load on it. This will prevent the loss of residual magnetism that produces the electricity.

Allow the generator to run 5 minutes at no load for the engine and the gen head to stabilize.

Make sure the adequate size of extension cord is used. Refer to the Grounding Instructions/Extension Cord section of the owners manual.

If the generator is operating equipment that is drawing half of the rated watts it is considered 50% load. Using all of the rated watts is considered 100% load.

ALWAYS REFER TO THE MANUALS SUPPLIED WITH THIS UNIT

D28733

22- ENG

Page 21 Page 23
Page 22
Image 22
Porter-Cable PGN350, D28733-034-0 instruction manual Quick Facts
Page 21 Page 23

D28733-034-0, PGN350 specifications

The Porter-Cable D28733-034-0, PGN350 is a versatile and robust tool designed for professionals and DIY enthusiasts who demand high-performance tools in their projects. This pneumatic nail gun is engineered for reliability and precision, making it a popular choice in the construction and woodworking industries.

One of the main features of the PGN350 is its lightweight design, which enhances portability and ease of use. Weighing in at just a few pounds, operators can maneuver this tool comfortably for extended periods, reducing fatigue during long job sessions. Additionally, its durable construction ensures it can withstand the rigors of job site conditions.

Equipped with a powerful motor, the PGN350 delivers exceptional driving force, allowing it to effortlessly handle a range of fasteners, including 1-1/4 inch to 3-1/2 inch collated framing nails. This versatility makes it suitable for various applications, including framing, decking, and other structural tasks. The tool’s depth adjustment feature provides improved control over nail depth, ensuring a professional finish even on varying materials.

The PGN350 incorporates advanced technologies that enhance user experience and performance. Its rapid-fire mode allows for quick and efficient nailing, which is an essential feature for projects requiring high productivity. Moreover, the tool is designed with a tool-free jam release mechanism, making it easy to clear nail jams without the need for additional tools, thus minimizing downtime.

Safety is also a priority with the PGN350. It comes equipped with a trigger lock-off feature, which prevents accidental firing, offering peace of mind when the tool is not in use. This safety mechanism is fundamental for maintaining workplace safety, particularly in busy construction environments.

The unit features a comfortable grip and an ergonomic design that provides stability and control, reducing the risk of wrist strain and enhancing overall efficiency. The tool's air inlet is compatible with standard air hoses, making it easy to integrate into existing pneumatic tool systems.

In summary, the Porter-Cable D28733-034-0, PGN350 stands out for its lightweight design, powerful performance, and user-friendly features. Its advanced technologies, safety mechanisms, and versatility make it an essential tool for anyone looking to accomplish professional-grade results in their woodworking or construction projects. Whether you are framing a house or building furniture, the PGN350 is built to deliver reliability and precision every time.
Top Page Image Contents