CHAIN ADJUSTMENT

See CHECK CHAIN TENSION in MAINTE- NANCE section.

REPLACING THE LINE

(for line trimmer attachment)

1.Remove spool by firmly pulling on tap but- ton.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080(2 mm) di- ameter Poulan brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Hub

Line in Notch

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART

PART NUMBER

Assist handle

530057546

Bolt carriage, 1/4-20

530015786

Wing nut

530016152

Bar

530044908

Chain

952051549

Hex nut

530015917

Oil cap

530053072

Bar adjusting screw/pin kit

530069110

Spool with 0.080trimmer line

952711616

Shield assembly

530071964--01

STORAGE

WARNING: Perform the following steps after each use.

S Stop the unit and disconnect the power source when not in use.

SCarry the unit with motor stopped.

SAllow motor to cool before storing or trans- porting.

SStore unit and extension cord indoors in a high, dry place out of the reach of children. Store unit unplugged.

SStore unit with all guards in place and position unit so that any sharp object cannot acciden- tally cause injury.

SEASONAL STORAGE

Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean it thoroughly before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces and guide bar.

S Oil the chain and wrap it in heavy paper or cloth.

18

Page 18
Image 18
Poulan 115260526 instruction manual Chain Adjustment, Replacing the Line, User Replaceable Service Parts, Seasonal Storage

115260526 specifications

The Poulan 115260526 is a versatile chainsaw that has gained popularity among both amateur and professional users for its reliability and performance. This model is designed for a variety of cutting tasks, ranging from trimming branches to felling trees. It combines a powerful engine with innovative features, making it an ideal choice for homeowners and landscapers alike.

One of the standout characteristics of the Poulan 115260526 is its robust engine. The chainsaw is equipped with a 25cc, 2-stroke engine that delivers impressive power for its class. This efficient engine enables users to tackle demanding cutting chores without experiencing unnecessary fatigue. Additionally, the lightweight design of the chainsaw makes it easier to maneuver and reduces the strain on the operator during extended use.

Another key feature of the Poulan 115260526 is its Easy Start technology. This intuitive starting system reduces the effort required to start the engine, allowing users to get to work quickly without the hassle of traditional pull-start systems. The reduced resistance in the starting mechanism enhances user experience, making it suitable for those who may be less experienced with chainsaws.

Safety is always a concern when using power tools, and the Poulan 115260526 addresses this with several built-in safety features. It comes equipped with a chain brake that activates when a kickback occurs, stopping the chain instantly to reduce the risk of injury. The chainsaw also features a hand guard to protect the user’s hands while operating.

The chainsaw's cutting capability is further enhanced by its Oregon chain and bar system. The 16-inch bar length paired with a high-quality chain ensures smooth and swift cutting, allowing users to tackle tougher wood with confidence. The automatic oiling system helps maintain the chain’s performance by delivering oil to the bar and chain during operation, thus extending the life of the components.

In terms of maintenance, the Poulan 115260526 is designed for easy access to critical parts, ensuring that users can swiftly perform routine checks and repairs. This practicality contributes to the chainsaw’s longevity and reliability over time.

In summary, the Poulan 115260526 stands out for its powerful yet lightweight design, user-friendly starting technology, safety features, and efficient cutting performance. These attributes make it a valuable tool for anyone looking to maintain their property or engage in landscaping projects. With the right care and maintenance, this chainsaw is sure to deliver exceptional results for years to come.