ASSEMBLY ￿

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Page 8
Image 8
Poulan 182080 manual Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts, Check Brake System
Page 7 Page 9

182080 specifications

The Poulan 182080 is a versatile and powerful chainsaw designed for both professional landscapers and DIY enthusiasts. Known for its reliability and efficiency, this model brings a combination of robust features and advanced technology that makes cutting tasks a breeze.

One of the standout features of the Poulan 182080 is its engine. It is equipped with a powerful 18-inch, 42cc two-stroke engine, providing an optimal balance of power and weight. This allows users to saw through dense wood and tackle heavy-duty tasks with minimal effort. The engine is designed for easy starting, which is a common frustration with many other chainsaws. Poulan's innovative starting technology ensures that the chainsaw fires up promptly with a few pulls, saving both time and energy.

The design of the Poulan 182080 is user-centered. It features an ergonomic handle that provides a comfortable grip while reducing vibration. This is especially important for prolonged use, as it minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw is equipped with an automatic oiler that ensures the chain is continuously lubricated, extending its lifespan and improving performance.

Safety is a priority with the Poulan 182080. It includes several safety features such as a chain brake, which stops the chain in the event of kickback, and a protective guard that shields the user's hands. This makes it suitable for both experienced operators and beginners alike.

The chainsaw is also designed with maintenance in mind. The air filter is easily accessible, allowing for quick cleaning or replacement, which is essential for keeping the chainsaw performing at its best. The tool-less chain tensioning system further simplifies the adjustment process, ensuring the chain remains in optimal condition during operation.

In summary, the Poulan 182080 stands out with its powerful engine, user-friendly design, and a host of safety features. Whether it's for pruning, cutting firewood, or tackling larger jobs, this chainsaw combines efficiency and reliability, making it a valuable tool for any user. Its thoughtful engineering ensures that both performance and safety are paramount, establishing it as a top choice in the competitive chainsaw market.
Top Page Image Contents