Cutters

Depth Gauge

Checking the tension:

 

 

 

 

 

 

 

 

 

Use the screwdriver end of the chain adjust-

 

 

 

 

 

 

 

 

 

ment tool (bar tool) to move the chain around

 

 

 

 

 

 

 

 

 

the bar. If the chain does not rotate, it is too

 

 

 

 

 

 

 

 

 

tight. If too loose, the chain will sag below the

 

 

 

 

 

 

 

 

 

bar.

 

 

 

 

 

 

 

 

 

 

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Chain Adjustment

Chain Brake Nuts

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turnadjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

SLift up the tip of the bar and securely tight- en the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Page 7
Image 7
Poulan 2050WT instruction manual Checking the tension, Chain Tension, Adjusting the tension
Page 6 Page 8

2050WT specifications

The Poulan 2050WT is a robust chainsaw designed for both professional and amateur users seeking a reliable tool for tackling various cutting tasks. This model stands out in its class due to its powerful engine, thoughtful design, and advanced features that enhance user experience and efficiency.

At the heart of the Poulan 2050WT is a powerful 50cc two-stroke engine, which provides ample power for felling trees, limbing, and bucking logs. This engine is engineered for performance and reliability, ensuring that the saw can handle demanding tasks without compromising operational effectiveness. The 20-inch bar and chain length offer an optimal balance between cutting capacity and maneuverability, making it suitable for both small and medium-sized cutting jobs.

One of the noteworthy features of the Poulan 2050WT is its ergonomic design, which includes a comfortable grip and lightweight build. This design allows for prolonged usage without causing excessive fatigue, making it an excellent choice for prolonged projects. The chainsaw also incorporates anti-vibration technology, which minimizes the vibrations felt by the operator. This technology not only enhances comfort but also helps in maintaining accuracy during cuts.

Safety is a significant consideration in the design of the Poulan 2050WT. It features a chain brake that can be activated manually, providing an additional layer of safety by stopping the chain immediately in case of kickback. The inertia-activated chain brake further ensures that users are protected during unexpected movements, making this chainsaw a safe option for both inexperienced and experienced users.

Another key feature of the Poulan 2050WT is its easy-start system, which simplifies ignition. The system allows for quick startups with minimal effort, overcoming one of the common challenges faced by chainsaw users. Additionally, the adjustable oil pump allows for customized lubrication settings, ensuring that the chain receives the appropriate amount of oil based on the cutting conditions.

The Poulan 2050WT is also known for its durability and ease of maintenance. Its air filter is user-friendly, ensuring that cleaning and replacement can be done quickly. The tool-less chain tensioning system makes it easier to keep the chain at the optimal tension, reducing downtime and improving overall efficiency.

In summary, the Poulan 2050WT combines power, comfort, and safety features into one effective chainsaw. Whether for household tasks or professional use, this chainsaw offers reliability and performance, making it a solid choice for anyone in need of a dependable cutting tool.
Top Page Image Contents