Cutters

Depth Gauge

Checking the tension:

 

 

Use the screwdriver end of the chain adjust-

 

 

ment tool (bar tool) to move the chain around

 

 

the bar. If the chain does not rotate, it is too

 

 

tight. If too loose, the chain will sag below the

 

 

bar.

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fit- ting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tight- en only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

S Lift up the tip of the bar and tighten the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 7
Image 7
Poulan 350, 530164364 instruction manual Checking the tension, Chain Tension, Adjusting the tension

530164364, 350 specifications

The Poulan 350,530164364 is a remarkable chainsaw that has made its mark as a reliable tool for both professionals and homeowners. Designed for versatility and ease of use, this chainsaw features a robust engine that delivers consistent power for a variety of cutting tasks.

One of the standout features of the Poulan 350 is its potent 2-stroke engine, which offers a balance of power and efficiency. With a displacement of around 50cc, this chainsaw can handle larger cutting jobs, making it suitable for everything from pruning trees to felling medium-sized ones. The engine is designed to provide high torque at low RPMs, ensuring that users can tackle tough wood without excessive strain on the machine or themselves.

In addition to its powerful engine, the Poulan 350 incorporates advanced technologies that enhance its usability. The chainsaw features an automatic oiling system that lubricates the bar and chain continuously, minimizing wear and ensuring smooth operation. This system is particularly useful during prolonged use, as it helps maintain the cutting performance and prolongs the life of the chain.

Comfort is another key characteristic of the Poulan 350,530164364. The chainsaw is designed with an ergonomic handle that reduces vibrations, allowing users to operate the tool comfortably for extended periods. Additionally, the lightweight construction of the equipment makes it easy to maneuver, reducing fatigue during demanding tasks.

Safety is a priority with this model, which includes several features aimed at protecting the user. The chainsaw is equipped with a chain brake that activates instantly if kickback occurs, stopping the chain's movement to reduce the risk of injury. Moreover, the Poulan 350 comes with a throttle lock that ensures the chainsaw operates only when intended.

Maintenance is simplified with the Poulan 350,530164364, as it features a tool-less access system for the air filter and spark plug. This design allows for quick and hassle-free servicing of the chainsaw, ensuring that it remains in optimal working condition.

In summary, the Poulan 350,530164364 combines power, innovation, and user-friendly features, making it an ideal choice for those looking to tackle a variety of cutting jobs effectively and safely. Whether you're a seasoned professional or a DIY enthusiast, this chainsaw is designed to deliver performance and reliability.