GENERAL INFORMATION
This instruction book is written for a person with some mechanical ability. Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the
unit.
Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instructions
and the safety rules. Keep this manual for future reference.
IMPORTANT: Many units are not assembled and are sold in cartons. It is the responsibility of the owner to make sure the assembly instructions in this manual are exactly followed. Other units are purchased in an assembled condition. On assembled units, it is the responsibility of the owner to make sure the unit is correctly assembled. The owner must carefully check the unit according to the instructions in this manual before it is first used.
GB
Controls & Equipment Features (see Figure 1)
Crank Assembly (2) - Changes the direction of the discharge chute. Chute Deflector (3) - Changes the distance the snow is thrown. Discharge Chute (4) - Changes the direction the snow is thrown.
Auger Drive Lever (5) - Starts and stops the auger (snow gathering and throwing) which also propels the snowthrower..
Engine Features
Stop Switch (8) - If equipped, move to the ON position to start the engine.
Primer Button (9) - Injects fuel directly into the carburetor for fast starts in cold weather.
Recoil Starter Handle (12) - Use to manually start the engine. Choke Control (14) - Use to start a cold engine.
Declared vibration emission values in accordance with Directive 98/37/EC. Vibration Emission according to EN 1033;1996: 2,5 m/s2.
Values determined at the handle when the machine was operated stationary on a concrete surface at 3700
Declared airborne noise emissions of LwA 108 dB is in accordance with Directive 2000/14/EC, Annex V.
Sound Pressure Level at operator position 89 dB.
Values determined at ear according to the specifications of EN ISO 11201.
Declared airborne sound
power level of 108 dB(A) is in
accordance with Directive
2000/14/EC.
3
