CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

Button

Air Filter

Cover

Air Filter

Cleaning the air filter:

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

NOTE: Move choke lever to RUN position before opening air filter cover.

2.Open air filter cover by pushing button (see illustration). Remove air filter.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed, nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Filter

Fuel Line

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are tightened securely to prevent damage.

Muffler

Mounting

Screw

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

NOTE: THE SPARK ARRESTING SCREEN ON THIS UNIT IS NOT SERVICEABLE.

For normal homeowner use, the muffler and spark arresting screen will not require replace- ment. After 50 hours of use, we recommend that your muffler be replaced by your authorized service dealer.

CARBURETOR IDLE SPEED ADJUSTMENT

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air

Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

-- 10 --

Page 9 Page 11
Page 10
Image 10
Poulan 952711923, 966454201 Clean AIR Filter, Replace Spark Plug, Replace Fuel Filter, Check Muffler Mounting Screws
Page 9 Page 11

115351127, 952711923, 966454201 specifications

The Poulan 952711923, 115351127, and 966454201 are essential accessories for outdoor power equipment enthusiasts. These models include innovative features designed to enhance the performance and functionality of lawn care and garden maintenance tools.

One of the standout aspects of these Poulan products is their compatibility with various Poulan and Poulan Pro equipment. This versatility allows users to easily interchange parts and ensure optimal performance across different machines. The design of these accessories reflects the brand's commitment to user convenience and efficient operation.

The Poulan 952711923 is distinguished by its high-quality trimmer line, which is engineered for superior cutting efficiency. This line boasts a co-polymer construction that provides enhanced durability, allowing it to withstand the rigors of tough cutting tasks while maintaining its shape and effectiveness over time. The trimmer line is designed for ease of use, enabling quick rewinding and installation, which is a boon for users looking to save time during their maintenance routines.

Moving to the Poulan 115351127, this particular model is primarily a replacement part designed for various outdoor power tools, contributing to seamless operation. It exemplifies Poulan's focus on providing reliable and robust components that extend the life of equipment by ensuring optimal performance and reducing the chances of breakdown during critical tasks.

Lastly, the Poulan 966454201 is another key component known for its reliability and efficiency. This particular product is geared towards enhancing the overall performance of lawn mowers. Its robust construction ensures that it can tackle a variety of cutting conditions, from dry grass to thicker undergrowth, thus making it suitable for diverse landscapes. Furthermore, Poulan's use of advanced materials in this model contributes to reduced wear and tear, making it a preferred choice for both casual homeowners and professional landscapers.

In conclusion, the Poulan 952711923, 115351127, and 966454201 encapsulate the brand's dedication to producing high-quality, efficient accessories for outdoor equipment. These products lend enhanced performance, longevity, and ease of use to your lawn care toolbox, solidifying Poulan’s reputation as a reliable choice in the outdoor power equipment market. Whether you're a home gardener or a landscaping professional, these models are designed to elevate your efficiency and effectiveness in maintaining your green spaces.
Top Page Image Contents