OPERATION

TIPS FOR IMPROVED BAGGING

OPERATION:

Follow the mower operation instructions in your tractor owner's manual.

When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time. The amount collected and the total time of operation may be greater than you will experience with regular use of your grass catcher.

Always run throttle at full speed when bagging.

Select a gear low enough to give good mower cutting performance, good quality cut and good bagging performance.

NOTE: It may be necessary to overlap width of cut to suit your conditions.

If grass is extremely tall, it should be mowed twice.The first time relatively high, the second time to desired height.

Use left hand side of mower for trimming.

Plastic trash bags can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full:

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

b.Raise seat. Unlatch and raise cover.

c.Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails.

d.With the container resting on the ground, close and secure the top of the plastic lawn bag.

e.Tip the container on its side and slide the filled bag from the container.

f.Install a new plastic lawn bag with the edges of the bag draped over upper lip of the container.

g.Repeat for other containers.

h.Reinstall containers making sure right container overlaps left container at center supports.

j.Close cover and secure latches over center support tubes.

Avoid cutting wet grass or in the morning while the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and adhere to the walls of the flow path causing clogging.

Your bagger is equipped with a dump bag indicator. As the bags become full, the flow indicating ball will drop down in its slot, indicating that the bags are full or the chutes have become clogged. Care should be taken not to damage the parts and that the ball moves freely at the beginning of each use.

NOTE: To help prevent clogging of chutes, check/empty bags when ball begins to drop down in the slot. Experience will teach you the best time to empty the bags.

If the grass catcher fails to pick up cut grass or leaves, it is an indication that clogging has occurred in the system or that the grass catcher containers are full.

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

-Raise seat. Unlatch and raise cover.

-Slide out containers and dispose of clippings .

-Replace containers, close cover, and latch.

b.Unlatch chutes and check for clogging

-Remove all debris in chutes.

-Reassemble and latch chutes

c.Check to insure dump bag indicator has not become clogged.

-The air passage hole must be clear of debris. Gently insert a small twig or wire into passageway to clear.

CAUTION

Do not operate mower with grass catcher partially installed.

Disengage blades and stop engine before leaving tractor seat to empty containers, unclogging chutes, etc.

Close cover before starting.

Disengage mower when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

Do not attempt to vacuum up cans or other potentially hazardous projectiles.

11

Page 11
Image 11
Poulan 954 04 04-01, CR38C, 532140602 owner manual Tips for Improved Bagging Operation

954 04 04-01, 532140602, CR38C specifications

The Poulan 954 04 04-01,532140602,CR38C is a highly regarded component in the world of outdoor power equipment, particularly known for its efficiency and reliability. This product is primarily focused on providing optimal performance for a variety of applications, including mowing, trimming, and maintaining yards and gardens.

One of the main features of the Poulan 954 04 04-01 is its robust construction which ensures longevity and durability. Built to withstand harsh outdoor conditions, this unit is made from high-quality materials that resist wear and tear. This reliability is essential for home gardeners and landscaping professionals who require dependable tools for their tasks.

In terms of performance, the CR38C is equipped with advanced engine technology that enhances power output while maintaining fuel efficiency. The engine is designed for easy starts and smooth operation, making it user-friendly for individuals of all skill levels. Users can expect quicker task completion due to the equipment's superior cutting capabilities, which help streamline yard maintenance.

The Poulan 954 04 04-01 also incorporates innovative safety features, ensuring that users can operate the machine with confidence. Features such as automatic shut-off systems and ergonomic designs make this equipment not only safe but also comfortable to handle during prolonged use. The design takes into consideration the user's interaction with the equipment, aiming to reduce fatigue and improve overall experience.

Another notable characteristic is its versatility. The CR38C can be easily adjusted to suit different mowing heights and conditions which is a significant advantage when dealing with varying types of grass and terrain. This adaptability allows homeowners and professionals alike to tackle a wide range of tasks efficiently.

In summary, the Poulan 954 04 04-01,532140602,CR38C stands out in the outdoor equipment market thanks to its combination of durability, performance, safety features, and versatility. Whether you're a homeowner looking to maintain your lawn or a landscaping pro handling larger projects, this product delivers reliability and efficiency in a stylish package. Its advanced technology and user-friendly design make it an excellent choice for anyone in need of a powerful lawn care companion. With Poulan's commitment to quality, users can trust that they are investing in a product designed for optimal service and satisfaction.