Poulan CR38C, 532140602 Assembly, Parts Identification, These Are The Tools You Will Need To As

ASSEMBLY

PARTS IDENTIFICATION

COVER

UPPER CHUTE

DUMP

BAGGER

INDICATOR

GRASS CATCHER CONTAINERS

02 341

	iner	is
onta	en
is propfreerqlyuieslannctselytm.alReleendpt.lcCaocnetawinher.
DWoAnocRNIttotopewdraNGeatameraamgnoedwdde. eUr tusienerlieoosnraslytcioaonnr.etaCciohnmeecrmk ebnadged rep
subjeed or
crack

	iner	is
onta	n
is propfreerlyquieslannctselytm.aRleleepndt.lcCaocentawheiner.
ING ower tuienrlieosnrsalytcioaonnr.etaCciohnmeecrmk ebnadged rep
DWobAnjeocRttotNooprerawdeatamaer magneddd. eUse o
csruacked

CHUTE LATCH

LOWER CHUTE	LOWER CHUTE
	ATTACHING
	WING NUT

WHEEL WEIGHT

U-BOLT

NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.

	(1)	3/8" Wrench	(1)	Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO AS- (1)		1/2" Wrench	(1)	3" or longer Extension
SEMBLE YOUR GRASS CATCHER:	(2)	9/16" Wrenches	(1)	Short Handle
	(1)	1/2" Socket		Phillips Screwdriver
	(1)	9/16" Deep well Socket

CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift/motion control lever in neutral (N) position.

• Place attachment clutch in "DISENGAGED" position.

•Turn ignition key "OFF" and remove key.

•Make sure the blade and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

6