Powermate P-WB-163150-[E] specifications Operation Continued • Save all instructions

Operation (Continued)

• Save all instructions

E How to Redirect Air Flow toward the Front (Continued)

When not in use, the front flow attachment can be stored under the frame at the rear of the unit. To secure the attachment for storage, follow the steps below and refer to Figure 10:

1. Turn the attachment so “This Side Up For STORAGE” is up.

2. Insert the attachment into frame opening, with the orientation identified on the label.

3. The edge of the attachment will be supported by a bracket

under the frame.Slot

4. Secure the attachment by forcing it upward and rotating it so the pin on the frame will insert into the slot on the attachment.

Support

Rod

Front Flow
Attachment	Figure 10

E Tips for Using your Walk Behind Blower

WARNING

Read the Operator’s manual. Know location and functions of all controls. Keep all safety devices and shields in place. Never allow children or uninstructed adults to operate the blower. Keep bystanders away from machine. Keep away from the fan intake opening and discharge chute, as the fan is rotating and can cause severe injury.

•Blowing leaves is best performed when conditions are dry.

•To clear a very large and/or heavy pile of leaves, make two passes: First point the directional adjustment upward to move the top of the pile. Then point the directional adjustment downward to move the base of the pile.

•When clearing leaves, always pay attention to natural wind direction and blow the leaves the same direction as the natural wind.

•To clear a small area, corral the leaves in the center by circling several times around the perimeter of the area.

•To clear a large area, move the leaves from one side to the other by making back and forth passes.

•Before starting a cleaning project, plan how the leaves will be collected and disposed.

Questions? Call Toll Free at 1-800-737-2112 11 Copyright © 2009 MAT Engine Technologies, LLC