Powermate P-WB-163150-[E] Specifications, Parts & Features, • Save all instructions, Figure

Specifications

• Save all instructions

Unit Weight . . . .	. . . . .	.	. . .	88 lb. (40 kg)
Maximum Air Flow . .	. . . . .	.	150 MPH / 1200 CFM
Fan Diameter . . . .	. . . . .		. . 13 in. (330 mm)
Fan Construction . .	. . . . .	4 Steel Blades, welded
Gasoline Type . . .	Regular Unleaded / 88 Octane (min.)
Gasoline Capacity . .	. . . . .	.	. .	. 3.5 qt. (3.3L)
Oil Type (API SG-SL)	10W-30 is recommended for all ser-

vice temperatures. See page 7 for additional information. Oil Capacity . . . . . . . . . . . . . 19 oz (562 ml)

Parts & Features

Spark Plug Model . . . .	.	. . . . . . Torch F7RTC
Spark Plug Gap	. 0.028-0.031 in. (0.7-0.8 mm)
Engine Type	4 Stroke, single cylinder, OHV
Displacement		. . . . . . .	. . 163cc
RPM	. . . . . . . .		3600 RPM

Torque Rating . . . 6.5 ft-lbs gross torque per SAE J1940 Bore Diam. x Stroke . . . . . . 2.7X1.8 in. (68X45 mm) Intake Valve Clearance . 0.0032-0.0047 in.(0.08-0.12 mm) Exhaust Valve Clearance . 0.0059-0.0079 in.(0.15-0.20mm) Angle of Ignition . . . . . . . . . . . . . . . . . . . . . . . . 25 Degrees

1.Fan – Rotating element which generates air flow

2.Fan Housing – Outer component which houses the fan

3.Intake Guard – Prevents fingers, hands, or large debris from entering the fan housing and contacting the fan blades

4.Discharge Chute – The location where the air flow exits the fan housing. Flow direction is to the left side of the unit from machine operator’s position.

5.Flow Angle Adjustment – Vertically adjusts the direction of air flow between 3 positions: level, 15 degrees up, and 15 degrees down.

6.Front Flow Attachment – Redirects the air flow toward the front of the unit. Can be removed and stored under the frame when not in use.

7.Attachment Knob – Secures attachments to the dis- charge chute

8.Front Swivel Wheel – 360 degree swiveling wheel to allow for maneuverability.

9.ON/OFF Switch – Stops the engine when turned to “OFF”. Must be turned to “ON” for engine to start and run.

10.Primer Bulb – Injects fuel mixture into the carburetor for ease of starting the engine.

11.Muffler – Location of engine exhaust.

12.Air Filter – Removes debris and contaminates from intake air, allowing engine to run smoothly and maintain engine life.

13.Recoil Starter Handle – The engine is equipped with an easy pull recoil starter.

14.Spark Plug/Spark Plug Wire – Provides spark to ignite air/ fuel mixture. The Spark Plug Wire must be disconnected and moved away from the Spark Plug when servicing the unit.

12

10		9
REAR VIEW		13
		FRONT VIEW
	2	3

1(inside)

11

14

7

4		6
8	5	Figure 1

Questions? Call Toll Free at 1-800-737-2112 5 Copyright © 2009 MAT Engine Technologies, LLC