Juniper Networks manual Planning Power Requirements, Power Specifications for EX2200 Switches

CHAPTER 7

Planning Power Requirements

•Power Specifications for EX2200 Switches on page 47

•AC Power Cord Specifications for EX2200 Switches on page 47

Power Specifications for EX2200 Switches

This topic describes the power supply electrical specifications for EX2200 switches.

Table 20 on page 47 provides the AC power supply electrical specifications for EX2200 switches.

Table 20: AC Power Supply Electrical Specifications for EX2200 Switches

Item	Specification
AC input voltage	100 through 240 VAC
AC input line frequency	50 Hz/60 Hz nominal
AC system current rating	• 7 A at 100 VAC and 2.9 A at 230 VAC (for switches with ports equipped for
	PoE)
	• 1.8 A at 100 VAC and 0.5 A at 230 VAC (for switches with no ports equipped
	for PoE)
Related •	AC Power Cord Specifications for EX2200 Switches on page 47
Documentation	Power Supply in EX2200 Switches on page 14
•

• General Safety Guidelines and Warnings for EX Series Switches on page 113

• General Electrical Safety Guidelines and Warnings for EX Series Switches on page 141

AC Power Cord Specifications for EX2200 Switches

Detachable AC power cords are supplied with the switch. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Copyright © 2010, Juniper Networks, Inc. 47