Complete Hardware Guide for EX2200 Ethernet Switches
•See Front Panel of an EX4500 Switch for the ESD point location.
•See Chassis Physical Specifications of an EX8208 Switch for the ESD point location.
•See Chassis Physical Specifications of an EX8216 Switch for the ESD point location.
AC Power Electrical Safety Guidelines for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes switches and the XRE200 External Routing Engine.
CAUTION: For devices with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.
The following electrical safety guidelines apply to
•Note the following warnings printed on the device:
“CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”
“ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.”
•
•You must provide an external certified circuit breaker rated minimum 20 A in the building installation.
•The power cord serves as the main disconnecting device for the
•For devices that have more than one power supply connection, you must ensure that all power connections are fully disconnected so that power to the device is completely removed to avoid electric shock. To disconnect power, unplug all power cords (one for each power supply).
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
144 | Copyright © 2010, Juniper Networks, Inc. |