Juniper Networks EX2200 manual Measuring for Mounting Screws

Chapter 8: Installing the Switch

c.Install screw C 5.98 in. (15.2 cm) on a plumb line down from screw A and screw D 5.98 in. down from screw B.

d.For PoE models, install screw E 2.76 in. (7 cm) up from and 8.32 in. (21.1 cm) to the right of screw A.

e.For PoE models, install screw F 4.49 in. (11.4 cm) to the right of screw E.

Figure 22: Measuring for Mounting Screws

Rear	Baffle for PoE Models
	(EX2200-24P and EX2200-48P)

18.68 in. (47.4 cm)

4.49 in.

8.32 in. (21.1 cm) (11.4 cm)

E F

2.76 in (7 cm)

A

5.98in.

(15.2 cm)

C

Side wall-mount brackets

Front

B

D

g021067

4.Lift the unit (one switch or two) by grasping each side, and hang the unit by attaching the brackets to the mounting screws as shown in Figure 23 on page 64.

5.For PoE models, install the baffle by attaching it to mounting screws E and F as shown in Figure 23 on page 64.

6.Tighten all mounting screws.

Copyright © 2010, Juniper Networks, Inc. 63