Complete Hardware Guide for EX2200 Ethernet Switches
Locating the Serial Number on an EX2200 Switch or Component
If you are returning an EX2200 switch or hardware component to Juniper Networks for repair or replacement, you must locate the serial number of the switch or component. You must provide the serial number to the Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain Return Materials Authorization (RMA).
If the switch is operational and you can access the CLI, you can list serial numbers for the switch and for some components with a CLI command. If you do not have access to the CLI or if the serial number for the component does not appear in the command output, you can locate the serial number ID label on the physical switch (see Figure 38 on page 107) or component.
NOTE: Ifyouwanttofindtheserialnumberonthephysicalswitchcomponent, you will need to remove the component from the switch chassis, for which you must have the required parts and tools available.
•Listing the Switch and Components Details with the CLI on page 106
•Locating the Chassis Serial Number ID Label on an EX2200 Switch on page 106
Listing the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following CLI command:
user@switch> show chassis hardware |
|
| |||
Hardware inventory: |
|
|
| ||
Item |
| Version | Part number | Serial number | Description |
Chassis |
|
| CV0209096579 | ||
Routing Engine 0 REV 2A | CV0209096579 | ||||
FPC 0 |
| REV 2A | CV0209096579 | ||
CPU |
|
| BUILTIN | BUILTIN | FPC CPU |
PIC | 0 |
| BUILTIN | BUILTIN | 24x 10/100/1000 |
PIC | 1 | REV 2A | CV0209096579 | 4x GE SFP | |
Power Supply 0 |
|
|
| PS 550W AC | |
Fan Tray |
|
|
| Fan Tray | |
Locating the Chassis Serial Number ID Label on an EX2200 Switch
EX2200 switches have serial number ID labels located on the rear panel of the chassis (see Figure 38 on page 107).
106 | Copyright © 2010, Juniper Networks, Inc. |
