Complete Hardware Guide for EX2200 Ethernet Switches
5.Perform initial configuration of the switch by following instructions in “Connecting and Configuring an EX Series Switch (CLI Procedure)” on page 87 or “Connecting and Configuring an EX Series Switch
6.Set the switch’s management options by following the appropriate instructions:
•Connecting an EX Series Switch to a Network for
•Connecting an EX Series Switch to a Management Console on page 76
Related • Rack Requirements for EX2200 Switches on page 39
Documentation
• Cabinet Requirements for EX2200 Switches on page 40
• Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches on page 42
Unpacking an EX2200 Switch
The EX2200 switches are shipped in a cardboard carton, secured with foam packing material. The carton has an accessory compartment and contains the quick start instructions.
CAUTION: EX2200 switches are maximally protected inside the shipping carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
1.Open the carton.
2.Pull out the packing material holding the switch in place.
3.Verify the parts received against the inventory on the label attached to the carton and listed in Table 22 on page 52.
4.Save the shipping carton and packing materials in case you need to move or ship the switch later.
Table 22: Inventory of Components Provided with an EX2200 Switch
Component | Quantity |
Switch with | 1 |
AC power cord appropriate for your geographical location | 1 |
Power cord retainer clip | 1 |
Mounting brackets | 2 |
52 | Copyright © 2010, Juniper Networks, Inc. |
