Juniper Networks manual Network Cable Specifications for EX2200 Switches

CHAPTER 6

Cable Specifications

•Network Cable Specifications for EX2200 Switches on page 45

Network Cable Specifications for EX2200 Switches

EX2200 switches have interfaces that use various types of network cables.

For instructions on connecting the switch to a network for out-of-band management using an Ethernet cable with an RJ-45 connector, see “Connecting an EX Series Switch to a Network for Out-of-Band Management” on page 74.

For instructions on connecting the switch to a management console using an Ethernet cable with an RJ-45 connector, see “Connecting an EX Series Switch to a Management Console” on page 76.

For instructions on connecting a fiber-optic cable to the switch, see “Connecting a

Fiber-Optic Cable to an EX Series Switch” on page 81.

Related • Management Port Connector Pinout Information for an EX2200 Switch on page 22

Documentation

• Console Port Connector Pinout Information for an EX Series Switch on page 21

• Front Panel of an EX2200 Switch on page 5

• Rear Panel of an EX2200 Switch on page 6

Copyright © 2010, Juniper Networks, Inc. 45